A local garage a had a few problems with this one.
The car cut out, and will not restart.
If left for 5 mins or 5 hours it will restart but cuts out then won't start again.
They tried to scan it for codes, but this resulted in the dreaded no codes found.
The vehicle did not support EOBD so no pending codes or freeze frame data.
This is where you need to have a basic understanding of the control systems.A few quick checks, and hey presto the Crank Angle Sensor is found to be faulty.
Once again checking inputs and outputs with a scope provides the answers when scan tools fail.
A new sensor restored normal operation.
No comments:
Post a Comment